Comprehensive Drilling
- Complete spectrum of canned cycles including spot drilling,
pecking, boring and tapping
- User defined sets of cycles and custom parameters - allows
reuse of sequence of operations (macro)
- Generation of standard hole patterns without geometry by
defining the parameters of a grid pattern, bolt circle or linear
pattern - saves time used to create part geometry
- Adjustment of hole sequence based on closest distance to next,
or a specified number of zig-zags on the x or y axis - minimize
air time
Spiral Pocketing
-
Handling of all combinations of islands, bosses, nested pockets,
and pockets at different depths - save time by allowing a single
operation instead of several
-
Climb and conventional milling
-
Collapsing from the outside or expanding from the inside of a
pocket
-
Helical, ramping angle or pre-drilled hole entry, multiple
entries
-
Constant offset in XY
Option for creating a re-roughing of rest material only
toolpath - allows re-machining of corners with smaller tool
Profile Milling
- Create path as an offset of a closed or open chain of lines,
arc, splines and conics
- Visual preview of cutter entry and exit locations, direction
and path position as offset to the inside, outside or directly
centered
- Set up of sets of finish passes and rough passes with separate
control of number of passes or removal per pass and order of
cutting (XY or Z)
- Support of tapered wall includes option to maintain sharp
cornersConfigurable lead in and lead out conditions with radial
blend, tangent and perpendicular options - eliminate dwell marks
- Full support for cutter diameter compensation
|
|
   |
